What is Asphalt Sealing?
Everyone wants a long lasting, beautiful looking asphalt pavement! You’ll need an effective sealant to ensure a gorgeous finish on your sidewalk or driveway. The sealer sits on top of a road and acts as the barrier that prevents car fluids, water, ice, salt, and other chemicals from damaging the surface.
Why is it crucial to seal an asphalt driveway, you may ask? When water seeps into the subgrade (the base), its compromises the strength of the material. As a result, dangerous potholes can form. Also, water trapped in the cracks can freeze in the winter months and cause additional damage when it thaws. Even if you live in warmer climates, grass can grow through the cracks in the road further deteriorate it. Finally, sealing asphalt prevents damage from UV light and gas spills.
Depending on your location, the frequency of applying driveway seals may differ. If you live in a cold climate, ideally you’ll want to reseal about every two years. If you inhabit a relatively moderate climate, such as Gaithersburg, you probably only need to apply a seal every three to four years. Regardless of location, new asphalt must be sealed no sooner than 90 days after construction.
Asphalt Sealing – Step By Step
Before you decide to seal a driveway, the ground temperature must be about 40 degrees Fahrenheit. Ensure there is no rain forecasted for next three days.
Preparing to seal an asphalt pavement requires a lot of preparation. Your body will need adequate protection. Cover it up properly, so your skin does not come in contact with unpleasant sealer. Avoid inhaling vapors produced by sealants.
Remove the grass at the edges of the road. With a special detergent, remove any gas or oil stains. Sweep the surface clean. Fill in the cracks with patching compound (available at home improvement centers). Allow plenty of time for the compound to dry. Follow all the instructions carefully when dealing with dangerous chemicals.
In case you missed any dirt during sweeping, hose down the surface. A pressure washer would be ideal for this job!
Mix the content of the tub of asphalt sealer by turning it upside down. For the sealant to remain well mixed, once you’ve opened the container, stir the mixture occasionally.
Start applying your asphalt sealer with a long-handled squeegee. You may find it easier to work one small square section at a time.
During drying time, which is at least 24 hours, the surface should not be used by vehicles or pedestrians.
How Much Does It Cost To Hire Specialists?
It would be impossible to determine set costs since material, and the size of the project vary. In truth, hiring a quality contractor will cost an around $50 to $100 more per 1000 square feet than doing a job yourself. In 2013, the average price for a seal coat job was $385.
Hiring contractors have one significant advantage. They will do it right. Professionals will know what materials to use, which sealers to avoid, and how often your driveway or parking lot will need to be sealed.
If you do the job yourself, you will save some money. However, if you hire professionals, benefits will outweigh your savings by far. Still, be aware of any hidden costs.
Only Limitless Paving has genuine quality performance. Give us a call. We will get you a free quote.
- How Much Does it Cost to Seal an Asphalt Driveway? (2013, February 28). Retrieved August 30, 2017, from https://www.angieslist.com/articles/how-much-does-it-cost-seal-asphalt-driveway.htm